« Autodesk Attacks the Clones of China | Main | The Wengerd Report: AutoCAD 2015's EULA »

Mar 30, 2014

Comments

Patrick Thrush

I have been using the Logi MX Master mice for a number of years now without any issue. It was after a major Win10 update that problems emerged--the sticking and erratic movements. Oddly, it seemed to come and go. Changes to Logi Unifying software, driver updates, so on, and so forth did nothing to change the behavior. I then found this article and moved the receiver to an empty port on the side of one of my Asus ProArt monitors--a good five feet away from the tower case. Problem solved! Thank you for posting this fix!

Boyd Carter

After replacing my win7 desktop with a new high-power win10, my Logitech K350 keyboard as well as my M510 mouse have been behaving erratically despite a variety of attempts to remediate. A 4 foot USB extender cord now places the receiver away from my desktop and about a foot past my keyboard and mouse. Both work perfectly now. Thank you so much for the solution.

Simon

Hello everyone! Thanks for this post. I wanted to share that I had this issue with a Logitech M510, erratic cursor, would drop connection, etc. I switched the batteries from almost dead Kodak AAs to charged (I believe fake) Eneloop Pro AAs, the issue persisted. I unpaired and re-paired the mouse and nothing.
Then I decided to use a brand new se of IKEA AAs made in Belgium and the mouse now works great!!!
So the quality of the battery should be something to inspect IMHO, the fake Eneloops were even heating up inside the mouse! I know my apple wireless keyboard doesn't even accept them so there you go... picky electronics.
Hopes this helps
Cheers!

Manny

I wouldn't have believed it if I hadn't tried it myself. My trusty M705 which I have had for years, started doing the erratic jumpy thing. I tried everything before I googled it and presto I found this blog. Works like a champ now

Pascal P.

I came to the same conclusion for awhile as it seemed to fix my issue, but recently it resurfaced. Erratic cursor movements, bad tracking of the buttons, etc. I needed to be real close to the receiver for it to somewhat work. This time I tried another receiver I had, repaired everything (I have an MX mouse and a keyboard), and all is good. So I come to the conclusion that the Unifying receiver can fail in a slow manner over time. Using a usb extension can alleviate the symptoms for a while, but if it degenerate again, you may have to change the receiver.

Greg T

Using the USB Extension lead solved the problem brilliantly... Someone at Microsoft should look at this solution instead of the BS answers they continually provide. I had tried every solution they proposed short of rebuilding my system none of which worked of course.

Thank you for a simple but effective and very logical answer

asdf

Look for dirt or lint in the optics - I had a small hair near the lens causing chaos.

Brian D

Thank you so much for ending hours of frustration trying other solutions that I found online.

john rogers

A million thanks!!!!! changed to the back USB and this works excellent! I F'ed around with this for 6 months! http://oppjunk.com

Al

This article made me do a double check on the nano receiver, and notice it was plugged in right next to a wifi nano-dongle. After moving them apart, the problem was gone.

Steve

I have the K850 keyboard that came with the M720 mouse. My mouse would slip away from the word document that I was moving to another location on my screen by sliding it across. The mouse would drop the word document and as I was sliding it would start dragging whatever was in the way (other folders in its path). Luckily I had another new Keyboard and M720 mouse. The new mouse with the new receiver fixed my problem. I can guess that maybe the receiver was failing, but since I replaced the mouse and the receiver I will have to later put back the old receiver on the new mouse and see if the problem comes back. I hope this will help the community with this problem and later I can add to this post. Thanks for sharing your info on your similar problems.

Harisse Gokani

So useful, this saved my expensive purchase!!! My sensor does not like to work on the back of a printed A4 paper but works wonders on the flap of my 2nd laptop!! I will now get a proper mousepad and see. Thanks article for inspiring!

John Krajeski

Thank you thank you thank you. You have saved my marriage of 51 years. My wife's Lenovo all-in-one computer just started doing this about 3 weeks ago, albeit on an intermittent basis. Prior to tonight I had solved it by unplugging and re-plugging the unifying receiver from one usb port to another (note all the ports are on the back of the huge monitor which also houses the hard drive, motherboard and other assorted electronic beasties). Then I found this post and Ta-Da, it worked a charm. Mr. Ralph Grabowski, you are a god among men. My wife thanks you, I thank you and my dog thanks you. If you were my next door neighbor, I'd make a couple dozen pierogis and come knocking on your door with them and a six pack of your favorite beer. Thanks again for your wonderful post. -John

Edward

I added a USB extender years ago and solved the problem. Then the problem came back! The cure was a longer USB extender cable and now the nano is just one foot away from the mouse.

dan

Dude - you are a helpful guy - thanks!

Jochem

Almost 7 years later and this is still a brilliant solution to my problem. Thanks! My mouse works perfectly now. But it's really bad that the logitech reciever is so weak.

John

My Logitech MX 310 corded mouse, after many years of trouble-free service, began to act erratically. I have a 2nd Logitech corded mouse, different model, that I use with a portable Mac computer. I tried using this 2nd one with my Mac. But I got the same erratic behavior, stalling and jumping. After reading a few of these comments/solutions, I arrived at the conclusion that Bluetooth might be involved. I've used Bluetooth lately, to transfer files between my iPhone and my Mac. So I went to the System Preferences>Bluetooth, and turned it off.

Bingo! The problem was completely solved. Both mice never worked better! If I need Bluetooth again, I can turn it on, and then turn it off when I'm done. Both my keyboard and mouse are corded, so I generally don't need Bluetooth.

Trackball hater

you saved me a new mouse. thanks I was just about to lose hope on this trackball.

mag

Wow, thanks!

Sylvain de Montréal

I noticed that weird behaviour when rearranging my USB cables and swapping my Logitech nano receiver from USB ports. It took me a while to figure out the problem. I searched in Google, found your article that pretty much confirms my thoughts. More swapping tests confirmed your theory. I found out about the same problem with a Dell nano receiver. Damned technology!

chi

Thanks so much for this tip!! I Moved the receiver to the other side of my laptop away from the power lead and second monitor cable side and it's fixed it .... smooth as now :)

Ron Mooshagian

I am having the same problem. I am going to purchase a male-female USB cord/Dongle and try it.

What is a good/optimum length to get?

Thanks in advance!!!

Ron

Ralph Grabowski

Logitech used to include an extender with their nanoreceivers; it is two inches long.

As for using a USB cable as the extender, a short one will do, such as six inches. Even long ones work fine, if you need to run the cable behind a desk or something.

Mike

I have long suspected the erratic behavior of my logitech keyboard and mouse could be due to signal interference. Thank everyone for your inputs. I just turned off my PC bluetooth, so far so good.

Another suspect is my Plantronics V5200 earphone, unplugging its connector seems to solve all problems at this moment. Guess I will be back to my wired headphones for Zoom meetings until I get to replace wireless keyboard and mouse with wired ones.

Bernard Dionne

I had tried to down load a new driver for this wireless mouse tracking problem. I searched and searched the internet to no avail until I fouind your advice.

THANK YOU SO MUCH, IT WORKED SIMPLY BE USING A USB PORT LOCATED FURTHER AWAY FROM THE PROBLEMATIC LOCATION ON MY DESKTOP WINDOWS 10 COMPUTER.

SO SIMPLE BUT THE BEST CURE! YOU ARE GREAT!

MikeS

Wow, so simple - I never thought to do this. Noticed instant improvement in the reliability and feel at home on a desktop. A win!

I use a laptop at work and it has the same issue with its TB16 (Dell) dock. Will try first thing tomorrow!

Leo Champion

This helped; completely solved my problem.

Thank you!!

Caiolinn Ertel

THANK YOU!

I had an extender and it worked like a charm!

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been saved. Comments are moderated and will not appear until approved by the author. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Post a comment

Comments are moderated, and will not appear until the author has approved them.

Your Information

(Name is required. Email address will not be displayed with the comment.)

Advertisements


Search This Blog


  •  

Translate

Thank you for visiting!